BAD ASS CHOPPER

:: Repaired Custom Paint Work & Fork Stops ::

PICT0662.JPG (31206 bytes)PICT0664.JPG (32782 bytes)PICT0665.JPG (25538 bytes)PICT0676.JPG (44891 bytes)PICT0675.JPG (44355 bytes)PICT0677.JPG (44024 bytes)

PICT0672.JPG (32437 bytes)PICT0673.JPG (41166 bytes)PICT0674.JPG (46282 bytes)PICT0548.JPG (36463 bytes)PICT0549.JPG (31722 bytes)PICT0550.JPG (33789 bytes)

 

Customer requested 3D fender pitchfork design with LED's integrated for tail lights and brake lights. 

Clay was used to simulate design.

pict0276.jpg (26590 bytes)pict0277.jpg (32144 bytes)

Once design was approved, steel fabrication started.

pict0282.jpg (15999 bytes)pict0280.jpg (31989 bytes)pict0281.jpg (28652 bytes)pict0279.jpg (21867 bytes)pict0278.jpg (21541 bytes)pict0284.jpg (15001 bytes)

Turn signals were fabricated for sides.

pict0287.jpg (21333 bytes)pict0288.jpg (26098 bytes)pict0289.jpg (26185 bytes)pict0292.jpg (23078 bytes)

Steel tubing

pict0291.jpg (24836 bytes)pict0286.jpg (19990 bytes)pict0288.jpg (26098 bytes)

Then skin added

pict0299.jpg (44371 bytes)pict0300.jpg (30897 bytes)

Paint and primer applied and part refinished.

pict0302.jpg (25329 bytes)pict0303.jpg (22057 bytes)pict0304.jpg (27038 bytes)pict0305.jpg (25337 bytes)pict0306.jpg (19747 bytes)pict0307.jpg (21114 bytes)pict0308.jpg (24613 bytes)pict0309.jpg (21204 bytes)

LED 3D Sculpted Fender Design

PICT0401.JPG (27854 bytes)PICT0402.JPG (27016 bytes)PICT0403.JPG (28722 bytes)PICT0404.JPG (26441 bytes)PICT0428.JPG (28454 bytes)PICT0429.JPG (25359 bytes)

PICT0430.JPG (29478 bytes)PICT0431.JPG (38383 bytes)PICT0432.JPG (23089 bytes)PICT0433.JPG (26753 bytes)PICT0505.JPG (28566 bytes)PICT0506.JPG (29375 bytes)

Previous Album    Next Album

Home    Pictures    Contact US    Feedback    HABI

Copyright © 2005 HABI LLC.  All rights reserved.
Revised: September 08, 2006.